Power Ready Industrial Systems are complete, fully integrated power supplies designed for site loads requiring 12, 24 or 48 volts DC. Each system provides reliable power generation without the need and expense of installing utility power. The sealed maintenance free batteries are designed for deep cycle operation and extended life in solar applications.

The aluminum array support structures and battery enclosures are strong yet lightweight and corrosion resistant for harsh marine or severe weather locations.

Because Power Ready Industrial Systems are designed to withstand rugged transportation to remote sites, single-lift integral lifting lugs and/or forklift slots are provided. Optional helicopter handling features are also available.

The system is fully assembled for factory testing before shipment. The pre-wired systems are typically shipped fully assembled with a protective cover over the array and are bolted to a skid. The solar array for larger systems is shipped in a separate plywood crate and the battery enclosure is mounted on a skid. In some cases, batteries are shipped separately. Careful component selection results in a system with a lifetime exceeding 25 years with battery replacements every five to ten years.


Power Ready
Industrial Systems

 Applications:

  • Telecommunications

  • RTU/SCADA Applications

  • Data Collections

  • Instrumentations

  • Security Lighting & Surveillance

  • Traffic & Railroad Signaling

  • Navigational Aids

  • Flow Monitoring

  • UHF/VHF Radio

  • Seismic Monitoring

  • Tank Gauging

  • Radio Telephones

  • Area/Sign Lighting

  • Cellular Extenders

  • Microwave Repeaters

  • Wireless Data Transmitter

  • Cathodic Protection

  •  Irrigation Control

 Options:

  • DC to DC converter

  • DC to AC Inverter

  • System Voltage

  • Module Wattage

  • Battery Rating

  • Enclosure Type

  • Enclosure Finish

  • Module Mount Type

  • Mount Finish

  • Wire Protection

  • Lightning Protection

  • Load Distribution and Control

  • Data logging/Remote Monitoring

  • Cathodic Protection Controller

  • Electronic Load Compartment

  • Theft Deterrent Solar Module Hardware

  • Helicopter Lifting Lugs

  • Bird Deterrents

  • Battery Voltage, SOC, Charging & Load Current and Controller Status/Error LCD Displays

  • Low Battery SOC/Load Disconnect Contact Closure

    •

Features:

  • Reliable, quite and easy to operate

  • Solar modules are fully encapsulated to resist harsh weather conditions

  • Pre-assembled and factory tested

  • Pre-wired and packaged for easy installation

  • Low voltage load disconnect

  • Maintenance free, deep-cycle and sealed lead-acid batteries designed for deep discharge cycling

  • NEC code compliant over-current protection and safely disconnect

  • Temperature compensated battery charging

  • Corrosion resistant control/battery enclosure

  • Solid state electronics for imprived efficiency and reliability

  • Pre-assembled, pre-wired systems minimize field installation time & eliminate wiring errors

  • Quality components assure long system life and operating costs

    •
Model

Descriptions

System Rating

Voltage

Battery

Price
PR5-12-19-EIAA-000 Economy Enclosure

5 W

12 VDC

19 Amp-h

CALL
PR10-12-19-EIAA-000 Economy Enclosure

10 W

12 VDC

19 Amp-h

CALL
PR20-12-38-CPAA-000 Screw Cover Front Door

20 W

12 VDC

38 Amp-h

CALL
PR36-12-70-CPAA-000 Screw Cover Front Door

36 W

12 VDC

70 Amp-h

CALL
PR40-12-70-CPAA-000 Screw Cover Front Door

40 W

12 VDC

70 Amp-h

CALL
PR50-12-115-CPAA-100 Screw Cover Front Door

50 W

12 VDC

115 Amp-h

CALL
PR75-12-130-CPAA-100 Screw Cover Front Door

75 W

12 VDC

130 Amp-h

CALL
PR100-12-230-FPAA-100 Hinged Front Door

100 W

12 VDC

230 Amp-h

CALL
PR150-12-260-FPAA-100 Hinged Front Door

150 W

12 VDC

260 Amp-h

CALL
PR200-12-390-FPAA-100 Hinged Front Door

200 W

12 VDC

390 Amp-h

CALL
PR240-12-460-FPAA-100 Hinged Front Door

240 W

12 VDC

460 Amp-h

CALL
PR300-12-600-TIAA-101 Pad Mount Enclosure

300 W

12 VDC

600 Amp-h

CALL
PR350-12-690-TIAA-101 Pad Mount Enclosure

350 W

12 VDC

690 Amp-h

CALL
PR400-12-795-TIAA-101 Pad Mount Enclosure

400 W

12 VDC

795 Amp-h

CALL
PR450-12-900-TIAA-101 Pad Mount Enclosure

450 W

12 VDC

900 Amp-h

CALL
PR500-12-1060-TIAA-101 Pad Mount Enclosure

500 W

12 VDC

1060 Amp-h

CALL

Call for pricing on 24/48 volt units and Systems configured with other options


E-Mail:
Thermo Technologies

Solar Electric Solutions | Electronic Products | Solar Thermal Resources

9009 Mendenhall Court
Suite E
Columbia, Maryland 21045
Voice: (410) 997-0778        Fax: (410) 997-0779